Service Phone: +8619870423316
Fiberglass spiral chute is a new type of technologically advanced mechanical equipment that combines the characteristics of spiral concentrators, spiral chutes, shakers, and centrifugal concentrators. It was developed in 1977 and is the best mechanical equipment for mining and concentrators, especially for sand mining in Haibin, waterfront, sand beach, and creeks. The fiberglass spiral chute product has the characteristics of reasonable structure, convenient installation and operation, small land occupation, simple actual operation, stable beneficiation plant, clear ore separation, large output, high efficiency beneficiation plant aggregation ratio, high utilization rate, and reliable operation. Glass fiber reinforced plastic spiral chute has the advantages of light weight, waterproof, anti rust treatment, corrosion resistance, strong adaptability to the fluctuation of ore feeding amount and concentration value, particle size distribution, and taste, and no noise.
2、 Structure and material of fiberglass spiral chute:
The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding trough, a spiral trough, a commodity extraction trough, a commodity gathering hopper, and a trough support frame (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is a key component. The spiral plate is made of fiberglass anti-corrosion (fiberglass elastomer material) and connected together with anchor bolts. The selection surface of the spiral groove has a wear-resistant layer of prefabricated components. The fiberglass spiral chute has the advantages of lightweight, sturdy, and durable daily necessities. The upper side of the fiberglass spiral chute is equipped with a multi tube feeding homogenizer to evenly distribute the ore, making it easy to operate. The ore separator is randomly placed on the cross (or tripod) of the support table. The evenly divided coal slurry is slowly fed to the surface of the spiral groove by the feeding groove at the head end of the spiral groove for screening. The tail of the fiberglass spiral chute is installed in a valve block type new product extraction tank, and the screened new products are divided into three (or four) new products according to grade along the axis. Change the total extraction width of each new product by adjusting the position of the valve block. The new product gathering bucket is a circular tube that gathers and guides the extracted double head ore flow separately. The cross-section of the rotating spiral chute and the tangent slope transformation of the curve are particularly suitable for the selection of fine particle raw materials. The rotating spiral chute has the advantages of simple structure, no fitness sports parts, light weight, low noise, and convenient installation and maintenance.
The hardness of commonly used metal composite materials for fiberglass spiral chutes is 9, second only to bare drills with a hardness of 10.
3、 The main uses of fiberglass spiral chutes are:
Fiberglass spiral chute is suitable for screening copper ore, Ilmenite, Chromite, Bauxite, zircon, Rutile, monazite, phosgenite, tungsten ore, tin ore, tantalum ore, niobium ore and other rare metals, nonferrous metals and mining enterprise objects with different proportions of 0.3-0.02mm coarse materials. The rotating spiral chute has the advantages of smooth and easy operation throughout the selection process, wide range of allowable changes in ore concentration values, high aggregation ratio, high utilization rate, small land occupation, low water consumption, simple structure, no need for driving force, large output, simple installation, convenient practical operation, and good investment effect.
4、 Operating method and basic principle of fiberglass spiral chute:
The glass fiber reinforced plastic spiral chute shall be erected, the bisector shall be corrected, the iron frame or wood shall be used to fix it at the appropriate position, the sand shall be sent to the two feeding outlets of the spiral top by the sediment pump, the water shall be added for filling, and the concentration value of the slurry shall be adjusted. The slurry shall certainly flow from high to low, causing an inertial Centripetal force in the rotating slope water flow, According to the force of vortex flow and the effect of Centripetal force, the ore and sand are separated, the titanium concentrate is injected into the titanium concentrate bucket and connected in series with pipelines, the industrial waste slag flows to the industrial waste slag bucket and receives the sand pool with pipelines, and then is discharged by the sediment pump, completing the whole process of the concentrator.
Looking for the source manufacturer of fiberglass spiral chutes, we are looking for Ganzhou Jinqiang Mining Equipment, which has a 15% share of re selection equipment. With rich experience, affordable prices, and complete services, we welcome inquiries and purchases.
Fiberglass spiral chute Related products