Toothed roller crusher Product display/Product display

Toothed roller crusher

24-hour phone/WhatsApp：+8619870423316

The toothed roller crusher is a new product developed based on the structural principles of the American Ganglac crusher and the domestic market demand. The toothed roller crusher has a large crushing capacity and can crush medium hardness ores and brittle materials. The motor and reducer are well-designed, ensuring safe and reliable operation.

The 齿辊破碎机(图1) double toothed roller crusher is suitable for the crushing of large and medium-sized coal mines or clean coal (including coal gangue) in fields such as coal and carbon, metallurgical industry, mining, chemical plants, decorative building materials, etc. The double toothed roll crusher has a large crushing capacity. The motor and reducer are connected by a limited distance Fluid coupling to avoid driving force load. The inductor is protected against overpressure and reliable. Adjusting the spacing between toothed rollers by hydraulic press, centralizing and moistening the rolling bearings of toothed rollers. Tooth type reliability design, tensile Shear stress selection and crushing, low consumption, and uniform granulation. The toothed roll crusher has the advantages of small size, large crushing ratio (5-8), low noise, simple structure, convenient maintenance, high production efficiency, uniform particle size distribution of crushed raw materials, low over crushing rate, convenient maintenance, smart overpressure protection, reliability and other characteristics. The 齿辊破碎机(图2) double tooth roller crusher is suitable for the crushing rate and work of solid raw materials with tensile strength lower than 300Mpa and moisture lower than 35%. The double tooth roller crusher can be widely used in fields such as mining, thermal power plants, concrete ceramics, metallurgical industry, chemical plants, decorative building materials, etc. It has the characteristics of low application and maintenance costs, reliable characteristics, low smoke and dust, and low noise. The working principle of the double tooth roller crusher When the double tooth roller crusher is working, the feeding system transports the material to the crushing chamber, and then uses a special wear-resistant tooth roller to rotate at high speed to split and crush the material. The gasket device adjusts the discharge particle size by increasing or decreasing the number or thickness of gaskets. When adding shims, the gap between the two rollers increases, while when reducing shims, the gap between the two rollers decreases and the discharge particle size decreases. The toothed roller crusher is composed of a transmission device, a frame part, a crushing roller, a mechanical spring device, a linkage mechanism, etc. Advantages of the 齿辊破碎机(图3) double tooth roller crusher: 1. High crushing ratio, low noise, low energy consumption, and simple and convenient maintenance. 2. Standard structure and long service life; 3. Large production capacity, low investment cost, and fast cost recovery. 4. The crushed material is uniform and meets the national sand making standards. What is the price of a double toothed roller crusher at 齿辊破碎机(图4) ? According to different models and production, the price range of double toothed roller crushers varies. The price of low production double toothed roller crushers ranges from tens of thousands to hundreds of thousands, but the price of high production and high standard large double toothed roller crushers is around several million yuan. The manufacturer of Jinqiang Four Tooth Roller Crusher has direct sales in stock, which makes delivery more timely. This means that the equipment you buy is much cheaper than intermediaries, and after-sales service will be safer. The specific price of the double toothed roller crusher is welcome to inquire online, and more relevant information will be answered by the technical manager for you. The manufacturer of four tooth roller crushers, Jinqiang Mining, is a large manufacturer of four tooth roller crushers. We have been specializing in the production of equipment for four tooth roller crushers for over 10 years, and have a well-established research and development team to create high standard and high-quality equipment for four tooth roller crushers. The production of equipment for four tooth roller crushers by the company is characterized by long service life, durability, simple operation, and uniform particle size of finished products The advantages of less overfilling and low energy consumption.